Looking to upgrade your kitchen or bathroom without a full remodel? Cabinet spraying is one of the most cost-effective ways to modernize your space with a sleek, factory-like finish. At Dymond Painting, we specialize in professional cabinet painting and spraying services throughout Maryland. If you’re thinking about tackling it yourself—or just want to understand the process—check out these pro tips for achieving a smooth, durable finish.
Why Choose Cabinet Spraying Over Brushing or Rolling?
Spraying your cabinets delivers a clean, even coat with no brush marks or roller texture. The result? A smooth, factory-finish look that rivals brand-new cabinets.
Cabinet spraying also:
- Enhances durability with proper prep and topcoats
- Improves resale value with a modern aesthetic
- Allows for a wide range of color choices and finishes
- Costs significantly less than a full cabinet replacement
Top Cabinet Spraying Tips from the Pros:
1. Label and Remove Everything
Before you do anything else, remove cabinet doors, drawers, and all hardware. Label each piece to make reassembly easy and accurate.
2. Clean Thoroughly
Grease, dust, and old residue will ruin your finish. Use a degreaser or TSP substitute to clean all surfaces completely before sanding.
3. Sand the Surfaces Smooth
Sanding helps the primer and paint stick better. Use a medium grit (around 120) for the first pass, then finish with a fine grit (220+) for ultra-smooth surfaces.
4. Prime Like a Pro
Primer is critical for preventing stains from bleeding through and for paint adhesion. Use a high-bonding primer made specifically for cabinets.
5. Use a HVLP or Airless Sprayer
For best results, use a High Volume Low Pressure (HVLP) or airless sprayer. Practice your spray technique on scrap wood or cardboard first to avoid drips and uneven coats.
6. Apply Thin, Even Coats
Spraying too heavily will cause runs. Apply multiple light coats—typically two of primer and two of paint—for a clean, professional finish.
7. Choose the Right Paint
Use a durable acrylic urethane or cabinet-grade enamel. These paints are designed to stand up to scrubbing, moisture, and daily wear and tear.
8. Allow Ample Dry and Cure Time
Cabinet paint may feel dry in a few hours, but it needs several days to fully cure. Avoid heavy use during this time to ensure long-lasting results.
Thinking About Hiring a Pro?
Cabinet spraying takes time, the right tools, and a lot of patience. If you’re looking for cabinet painters in Towson who can get it right the first time, Dymond Painting is here to help. Our team delivers showroom-quality cabinet finishes with minimal disruption to your home.